PowerFlex 750-Series AC Drives User Manual

3-102 Programming and ParametersFileGroupNameNo. DescriptionValues937 Condition Sts 1Condition Status 1Status of conditions that may or may not result in the drive taking action (faulting), based on configuration of protective functions.Read-WriteData TypeOptionsOW Timeout (1)GndWarningExtPrchrgErrPosFdbkLossAuxFdbkLossAltFdbkLossPriFdbkLossShear Pin 2Shear Pin 1Dec InhibitOutPhaseLossInPhaseLossLoad LossMotor OLUnderVoltagePower LossDefault 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0(1) 753 drives only0 = Condition False1 = Condition TrueDIAGNOSTICSStatus940 Drive OL CountDrive Overload CountIndicates power unit overload (IT) in percentage. When the value reaches 100 %,the power unit overload fault occurs.941 IGBT Temp PctInsulated-Gate Bipolar Transistor Temperature PercentIndicates IGBT junction temperature in percentage of the maximum junctiontemperature.942 IGBT Temp CInsulated-Gate Bipolar Transistor Temperature CelsiusIndicates IGBT junction temperature in centigrade.943 Drive Temp PctDrive Temperature PercentIndicates operating temperature of the drive power section (heat-sink) inpercentage of the maximum heat-sink temperature.944 Drive Temp CDrive Temperature CelsiusPresent operating temperature of the drive power section.Units: %Default: 0.00Min/Max: 0.00 / 200.00Units: %Default: 0.00Min/Max: –/+200.00Units: DegCDefault: 0.00Min/Max: –/+200.00Units: %Default: 0.00Min/Max: –/+200.00Units: DegCDefault: 0.00Min/Max: –/+200.00RORORORORORealRealRealRealRealPowerFlex 750-Series User Manual – Publication 750-UM001C-EN-P – September 2009