PowerFlex 750-Series AC Drives User Manual

2-6 Start UpPossible Settings Description000 Adapter will use, depending on P36 [BOOTP], the BOOTP setting or theadapter parameter settings for the IP address.001…254 Adapter will use the rotary switch settings for the IP address(192.168.1.xxx, where xxx = rotary switch settings).255…887 Adapter will use, depending on P6 [BOOTP], the BOOTP setting or theadapter parameter settings for the IP address.888 Resets the adapter IP address function to factory defaults. Thereafter, thedrive must be powered down, the switches set to a setting other than 888,and then the drive must be powered up again to accept the new address.889…998 Adapter will use, depending on P36 [BOOTP], the BOOTP setting or theadapter parameter settings for the IP address.999Disables the rotary switches. Adapter will use, depending on P36(default settings) [BOOTP], the BOOTP setting or the adapter parameter settings for the IPaddress.PowerFlex 750-Series User Manual – Publication 750-UM001C-EN-P – September 2009