PowerFlex 750-Series AC Drives User Manual

Chapter 3Programming and ParametersThis chapter provides a complete listing and description of the PowerFlex750-Series drive parameters. The parameters can be programmed (viewed/edited) using a Human Interface Module (HIM). Refer to Appendix B forinformation on using the HIM to view and edit parameters. As analternative, programming can also be performed using DriveToolssoftware and a personal computer.For information on...See pageAbout Parameters 3-1How Drive Parameters are Organized 3-3How Option Module Parameters are Organized 3-15Drive Monitor File 3-19Drive Motor Control File 3-20Drive Feedback & I/O File 3-28Drive Cfg File 3-42Drive Protection File 3-54Drive Speed Control File 3-62Drive Torque Control File 3-78Drive Position Control File 3-83Drive Communication File 3-95Drive Diagnostics File 3-100Drive Applications File 3-109Drive Parameter Cross Reference By Name 3-131I/O Module Parameters 3-137Single Incremental Encoder Module Parameters 3-159Safe Speed Monitor Module Parameters 3-148Dual Incremental Encoder Module Parameters 3-161Universal Feedback Module Parameters 3-166Embedded EtherNet/IP Parameters 3-178About ParametersTo configure a drive module to operate in a specific way, certain driveparameters may have to be configured appropriately. Three types ofparameters exist:• ENUM ParametersThese parameters allow a selection from 2 or more items. The LCD HIMwill display a text message for each item.• Bit ParametersThese parameters have individual bits associated with features orconditions. If the bit is 0, the feature is off or the condition is false. If thebit is 1, the feature is on or the condition is true.• Numeric ParametersThese parameters have a single numeric value (i.e. 0.1 Volts).PowerFlex 750-Series User Manual – Publication 750-UM001C-EN-P – September 2009