PowerFlex 750-Series AC Drives User Manual

3-140 Programming and ParametersFileHOST GROUPSGroupDigital OutputsNameNo. Description24 RO1 On TimeRelay Output 1 On Time – I/O Module model 20-750-2262C-2R or20-750-2262D-2R is installed.TO0 On TimeTransistor Output 0 On Time – I/O Module model 20-750-2263C-1R2T isinstalled.Sets the “ON Delay” time for the digital outputs. This is the time between theoccurrence of a condition and activation of the relay or transistor.25 RO1 Off TimeRelay Output 1 Off Time – I/O Module model 20-750-2262C-2R or20-750-2262D-2R is installed.TO0 Off TimeTransistor Output 0 Off Time – I/O Module model 20-750-2263C-1R2T isinstalled.Sets the “OFF Delay” time for the digital outputs. This is the time between thedisappearance of a condition and de-activation of the relay or transistor.30 TO1 SelTransistor Output 1 SelectSelects the source that will energize the transistor output.Any status parameter bit can be used as an output source. For example P935[Drive Status 1] bit 7 “Faulted”.Important: Only used by I/O Module model 20-750-2263C-1R2T.31 TO1 Level SelTransistor Output 1 Level SelectSelects the source of the level that will be compared.Important: Only used by I/O Module model 20-750-2263C-1R2T.32 TO1 LevelTransistor Output 1 LevelSets the level compare value.Important: Only used by I/O Module model 20-750-2263C-1R2T.ValuesUnits: SecsDefault: 0.0Min/Max: 0.0 / 600.0Units: SecsDefault: 0.0Min/Max: 0.0 / 600.0Default: 0 (Disabled)Min/Max: 0 / 159999.15Default: 0 (Disabled)Min/Max: 0 / 159999.15Default: 0.0Min/Max: –/+1000000.0Read-WriteData TypeRW RealRW RealRW 32-bitIntegerRW 32-bitIntegerRW Real33 TO1 Level CmpStsTransistor Output 1 Level Compare StatusStatus of the level compare, and a possible source for a transistor output. Transistor Output X Select must have this selected to energize the output.Can be used without a physical output as status information only.OptionsReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedGrt Than EquLess ThanDefault 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 00 = Condition False1 = Condition TrueBit 0 “Less Than” – Level source is less than the level value.Bit 1 “Grt Than Equ” – Level source is greater than or equal to the level value.Important: Only used by I/O Module model 20-750-2263C-1R2T.34 TO1 On TimeTransistor Output 1 On TimeSets the “ON Delay” time for the digital outputs. This is the time between theoccurrence of a condition and activation of the transistor.Important: Only used by I/O Module model 20-750-2263C-1R2T.35 TO1 Off TimeTransistor Output 1 Off TimeSets the “OFF Delay” time for the digital outputs. This is the time between thedisappearance of a condition and de-activation of the transistor.Important: Only used by I/O Module model 20-750-2263C-1R2T.Units: SecsDefault: 0.0Min/Max: 0.0 / 600.0Units: SecsDefault: 0.0Min/Max: 0.0 / 600.0RW RealRW RealPowerFlex 750-Series User Manual – Publication 750-UM001C-EN-P – September 2009