PowerFlex 750-Series AC Drives User Manual

More documents

Recommendations

Info

1-2 Installation/WiringLifting the DriveThe dimensions and weights specified must be taken into considerationwhen mounting the drive. All lifting equipment and lifting components(hooks, bolts, lifts, slings, chains, etc.) must be properly sized and rated tosafely lift and hold the weight of the drive while mounting.!Figure 1.1ATTENTION: To guard against possible personal injury and/orequipment damage…• Inspect all lifting hardware for proper attachment beforelifting drive.• Do not allow any part of the drive or lifting mechanism tomake contact with electrically charged conductors orcomponents.• Do not subject the drive to high rates of acceleration ordeceleration while transporting to the mounting location orwhen lifting.• Do not allow personnel or their limbs directly underneath thedrive when it is being lifted and mounted.Frame 6 Open Type and Flange Mount: Weight: 38.6 kg (85.0 lb)>1/2 A1/2 A
Installation/Wiring 1-3IP00, NEMA/UL Open TypeFrame 6 Lifting Points – 6 PlacesFrame 7 Lifting Points – 8 PlacesFlange Mount (Back/Heatsink: IP66, NEMA/UL Type 4X/12)Frame 6 Lifting Points – 2 PlacesFrame 7 Lifting Points – 4 PlacesPowerFlex 750-Series User Manual – Publication 750-UM001C-EN-P – September 2009
Page 1: PowerFlex 750-Series AC DrivesUser
Page 9 and 10: PrefaceOverviewThe purpose of this
Page 11 and 12: Overview P-3Manual Conventions •
Page 13 and 14: Overview P-5Product Safety!!!!ATTEN
Page 15: Chapter 1Installation/WiringChapter
Page 19 and 20: Installation/Wiring 1-5Opening the
Page 21 and 22: Installation/Wiring 1-7Mounting Con
Page 23 and 24: Installation/Wiring 1-9If any of th
Page 26 and 27: 1-12 Installation/WiringTable 1.B R
Page 28 and 29: 1-14 Installation/WiringSingle-Phas
Page 30 and 31: 1-16 Installation/WiringFigure 1.9T
Page 32 and 33: 1-18 Installation/WiringTerminal De
Page 34 and 35: 1-20 Installation/WiringCommon Bus
Page 36 and 37: 1-22 Installation/WiringUsing Input
Page 38 and 39: 1-24 Installation/Wiring!!ATTENTION
Page 40 and 41: 1-26 Installation/WiringPower Jumpe
Page 42 and 43: 1-28 Installation/WiringI/O WiringI
Page 44 and 45: 1-30 Installation/Wiring2. Lift the
Page 46 and 47: 1-32 Installation/WiringTable 1.M J
Page 48 and 49: 1-34 Installation/WiringHardware En
Page 50 and 51: 1-36 Installation/WiringOption Modu
Page 52 and 53: 1-38 Installation/WiringTable 1.V T
Page 54 and 55: 1-40 Installation/WiringInput/Outpu
Page 56 and 57: 1-42 Installation/WiringInput/Outpu
Page 58 and 59: 1-44 Installation/WiringSafe Torque
Page 60 and 61: 1-46 Installation/WiringAuxiliary P
Page 62 and 63: 1-48 Installation/WiringControlNet
Page 64 and 65: 1-50 Installation/WiringCE Conformi
Page 66 and 67:
1-52 Installation/WiringInstallatio
Page 68 and 69:
1-54 Installation/WiringNotes:Power
Page 70 and 71:
2-2 Start Up❏4. The remainder of
Page 72 and 73:
87 94 5 612 0387 94 5 6132 02-4 Sta
Page 74 and 75:
2-6 Start UpPossible Settings Descr
Page 76 and 77:
3-2 Programming and ParametersThe f
Page 78 and 79:
3-4 Programming and ParametersFile
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
3-10 Programming and ParametersExpe
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
3-18 Programming and ParametersEmbe
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
3-42 Programming and ParametersDriv
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
3-100 Programming and ParametersDri
Page 176 and 177:
3-102 Programming and ParametersFil
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
3-132 Programming and ParametersPar
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
3-148 Programming and ParametersSaf
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
3-166 Programming and ParametersUni
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
3-178 Programming and ParametersEmb
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
3-184 Programming and ParametersNot
Page 260 and 261:
87 94 5 612 0387 94 5 6132 04-2 Tro
Page 262 and 263:
4-4 TroubleshootingFault and Alarm
Page 264 and 265:
4-6 TroubleshootingEventFault Confi
Page 266 and 267:
4-8 TroubleshootingEventNo. Fault/A
Page 268 and 269:
4-10 TroubleshootingEventFault Conf
Page 270 and 271:
4-12 TroubleshootingI/O Faults and
Page 272 and 273:
4-14 TroubleshootingUniversal Feedb
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
4-20 TroubleshootingCommon Symptoms
Page 280 and 281:
4-22 TroubleshootingTechnical Suppo
Page 282 and 283:
A-2 Supplemental Drive InformationC
Page 284 and 285:
A-4 Supplemental Drive InformationP
Page 286 and 287:
A-6 Supplemental Drive InformationM
Page 288 and 289:
A-8 Supplemental Drive InformationC
Page 290 and 291:
A-10 Supplemental Drive Information
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
B-2 Control Block DiagramsDiagram C
Page 318 and 319:
B-4 Control Block DiagramsVF, SV Ov
Page 320 and 321:
B-6 Control Block DiagramsSpeed Con
Page 322 and 323:
B-8 Control Block DiagramsSpeed Con
Page 324 and 325:
B-10 Control Block DiagramsSpeed Co
Page 326 and 327:
Page 328 and 329:
B-14 Control Block DiagramsPosition
Page 330 and 331:
Page 332 and 333:
B-18 Control Block DiagramsTorque C
Page 334 and 335:
Page 336 and 337:
B-22 Control Block DiagramsProcess
Page 338 and 339:
B-24 Control Block DiagramsInputs &
Page 340 and 341:
B-26 Control Block DiagramsControl
Page 342 and 343:
B-28 Control Block DiagramsList of
Page 344 and 345:
B-30 Control Block DiagramsFlux Vec
Page 346 and 347:
B-32 Control Block DiagramsSpeed/Po
Page 348 and 349:
Page 350 and 351:
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Page 358 and 359:
Page 360 and 361:
Page 362 and 363:
Page 364 and 365:
Page 366 and 367:
Page 368 and 369:
B-54 Control Block DiagramsProcess
Page 370 and 371:
B-56 Control Block DiagramsInputs &
Page 372 and 373:
B-58 Control Block DiagramsControl
Page 374 and 375:
B-60 Control Block DiagramsDiagnost
Page 376 and 377:
C-2 Application NotesExternal Brake
Page 378 and 379:
C-4 Application Notes!ATTENTION: Us
Page 380 and 381:
D-2 Human Interface Module (HIM) Ov
Page 382 and 383:
Page 384 and 385:
Page 386 and 387:
Page 388 and 389:
D-10 Human Interface Module (HIM) O
Page 390 and 391:
E-2 Universal Feedback Encoder Opti
Page 392 and 393:
Page 394 and 395:
Page 396 and 397:
Page 398 and 399:
E-10 Universal Feedback Encoder Opt
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
F-2 Incremental Encoder Option Modu
Page 408 and 409:
Page 410 and 411:
Page 412 and 413:
G-2 Using DeviceLogixNote: PowerFle
Page 414 and 415:
G-4 Using DeviceLogixFileGroupNo.Na
Page 416 and 417:
G-6 Using DeviceLogixBit OutputsAva
Page 418 and 419:
G-8 Using DeviceLogixDLX Real SP1 i
Page 420 and 421:
G-10 Using DeviceLogixFigure G.1 Tw
Page 422 and 423:
G-12 Using DeviceLogixExample 2: Sc
Page 424 and 425:
G-14 Using DeviceLogixExample 3: Di
Page 426 and 427:
G-16 Using DeviceLogixExample logic
Page 428 and 429:
G-18 Using DeviceLogixFigure G.5 Fa
Page 430 and 431:
G-20 Using DeviceLogixNotes:PowerFl
Page 432 and 433:
H-2 Permanent Magnet MotorsNotes:Po
Page 434 and 435:
Index-2FaultsDrive Fault Cross Refe
Page 436:
Index-4UUnbalanced/Ungrounded Suppl
show all

PowerFlex 750-Series AC Drives User Manual

Create successful ePaper yourself

Delete template?

Save as template?