PowerFlex 750-Series AC Drives User Manual

3-156 Programming and ParametersFileGroupValuesRead-WriteData TypeNameNo. Description68 Guard StatusGuard StatusOptionsReservedReservedReservedReservedReservedWait No StopWait SS CycWait ResetReset InESM In ProgESM InLM InDM In ProgDM InDC OutDC LockSDM In ProgSMA In ProgSMS In ProgSLS OutSLS In ProgSLS ReqSLS InSS OutSS StoppedSS DecelSS In ProgSS ReqSS InMP OutConfig LockStatusOKDefault 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0HOST GROUPSFaultsBit 0 “StatusOK” – 0 = Fault; 1 = OKBit 1 “Config Lock” – Configuration_Lock: 0 = Unlock; 1 = LockBit 2 “MP Out” – MP_Out_Value: 0 = Off; 1 = OnBit 3 “SS In” – SS_In_Value: 0 = Off; 1 = OnBit 4 “SS Req” – SS_Request_Status: 0 = Inactive; 1 = ActiveBit 5 “SS In Prog” – SS_In_Progress: 0 = Inactive; 1 = ActiveBit 6 “SS Decel” – SS_Decelerating_Status: 0 = Inactive; 1 = ActiveBit 7 “SS Stopped” – SS_Axis_Stopped_Status: 0 = Inactive; 1 = ActiveBit 8 “SS Out” – SS_Output_Value: 0 = Off; 1 = OnBit 9 “SLS In” – SLS_In_Value: 0 = Off; 1 = OnBit 10 “SLS Req” – SLS_Request_Status: 0 = Inactive; 1 = ActiveBit 11 “SLS In Prog” – SLS_In_Progress: 0 = Inactive; 1 = ActiveBit 12 “SLS Out” – SLS_Output_Value: 0 = Off; 1 = OnBit 13 “SMS In Prog” – SMS_In_Progress: 0 = Inactive; 1 = ActiveBit 14 “SMA In Prog” – SMA_In_Progress: 0 = Inactive; 1 = ActiveBit 15 “SDM In Prog” – SDM_In_Progress: 0 = Inactive; 1 = ActiveBit 16 “DC Lock” – DC_Lock_Status: 0 = Lock; 1 = UnlockBit 17 “DC Out” – DC_Out_Value: 0 = Off; 1 = OnBit 18 “DM In” – DM_In_Value: 0 = Off; 1 = OnBit 19 “DM In Prog” – DM_In_Progress: 0 = Inactive; 1 = ActiveBit 20 “LM In” – LM_In_Value: 0 = Off; 1 = OnBit 21 “ESM In” – ESM_In_Value: 0 = Off; 1 = OnBit 22 “ESM In Prog” – ESM_In_Progress: 0 = Inactive; 1 = ActiveBit 23 “Reset In” – Reset_In_Value: 0 = Off; 1 = OnBit 24 “Wait Reset” – Waiting_for_SS_Reset: 0 = Inactive; 1 = ActiveBit 25 “Wait SS Cyc” – Waiting_for_Cycle_SS_In: 0 = Inactive; 1 = ActiveBit 26 “Wait No Stop” – Waiting_for_Stop_Request_Removal: 0 = Inactive; 1 = ActivePowerFlex 750-Series User Manual – Publication 750-UM001C-EN-P – September 2009