PowerFlex 750-Series AC Drives User Manual

Programming and Parameters 3-141FileGroupNo.NameDescriptionValuesRead-WriteData Type40 PTC CfgPositive Temperature Coefficient ConfigurationSets the action that will be taken when the PTC is not Ok.“Ignore” (0) – No action is taken“Alarm” (1) – Alarm occurs“Flt Minor” (2) – Minor Fault occurs if enabled, otherwise Fault Coast Stop“FltCoastStop” (3) – Fault Coast Stop occurs“Flt RampStop” (4) – Fault Ramp Stop occurs“Flt CL Stop” (5) – Fault Current Limit Stop occursDefault:Options:0 = “Ignore”0 = “Ignore”1 = “Alarm”2 = “Flt Minor”3 = “FltCoastStop”4 = “Flt RampStop”5 = “Flt CL Stop”RW 32-bitIntegerHOST GROUPSMotor PTC41 PTC StsPositive Temperature Coefficient StatusStatus of the PTC.OptionsReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedOver TempPTC ShortPTC OkDefault 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 00 = Condition False1 = Condition TrueBit 0 “PTC Ok” – PTC is OKBit 1 “PTC Short” – PTC is ShortedBit 2 “Over Temp” – PTC is indicating over temperature42 PTC Raw ValuePositive Temperature Coefficient Raw ValueDisplays the value of the PTC.Units: VACDefault: 0Min/Max: 0 / 10RORealFileGroupNo.NameDescriptionValuesRead-WriteData Type45 Anlg In TypeAnalog Input TypeStatus of the analog input mode set by the option jumpers.OptionsReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedAnalog 1Analog 0HOST GROUPSAnalog InputsDefault 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 046 Anlg In SqrtAnalog Input Square RootEnables/disables the square root function for each input.0 = Voltage Mode1 = Current ModeOptionsReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedReservedAnalog 1Analog 0Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 00 = Square Root Disabled1 = Square Root EnabledPowerFlex 750-Series User Manual – Publication 750-UM001C-EN-P – September 2009