PowerFlex 750-Series AC Drives User Manual

Overview P-5Product Safety!!!!ATTENTION: An incorrectly applied or installed drive canresult in component damage or a reduction in product life.Wiring or application errors such as under sizing the motor,incorrect or inadequate AC supply, or excessive surrounding airtemperatures may result in malfunction of the system.ATTENTION: This drive contains ESD (ElectrostaticDischarge) sensitive parts and assemblies. Static controlprecautions are required when installing, testing, servicing orrepairing this assembly. Component damage may result if ESDcontrol procedures are not followed. If you are not familiar withstatic control procedures, reference Guarding AgainstElectrostatic Damage, publication 8000-4.5.2 or any otherapplicable ESD protection handbook.ATTENTION: Configuring an analog input for 0-20 mAoperation and driving it from a voltage source could causecomponent damage. Verify proper configuration prior toapplying input signals.ATTENTION: A contactor or other device that routinelydisconnects and reapplies the AC line to the drive to start andstop the motor can cause drive hardware damage. The drive isdesigned to use control input signals that will start and stop themotor. If an input device is used, operation must not exceed onecycle per minute or drive damage will occur.Class 1 LED Product!ATTENTION: Hazard of permanent eye damage exists whenusing optical transmission equipment. This product emits intenselight and invisible radiation. Do not look into module ports orfiber optic cable connectors.PowerFlex 750-Series User Manual – Publication 750-UM001C-EN-P – September 2009