PowerFlex 750-Series AC Drives User Manual

1-26 Installation/WiringPower Jumper Wire Removal and StorageFrames 6…7 use jumper wires to complete an electrical connection wheninstalled. Install or remove jumper wires according to the recommendationsin Table 1.J.!ATTENTION: Hazard of equipment damage exists if jumpersare not properly disconnected. For Frames 6…7, secure thedisconnected jumper wire to the standoff provided.Figure 1.16 Frame 6 Jumper Wire LocationsConnectedDisconnectedCommon ModeMOVWhen jumper wires are connected:• Recommended torque (screws and nuts) = 1.36 N•m (12.0 lb•in)• Recommended hex socket = 7 mm• Recommended screwdriver = T20 HexalobularPowerFlex 750-Series User Manual – Publication 750-UM001C-EN-P – September 2009