PowerFlex 750-Series AC Drives User Manual

3-100 Programming and ParametersDrive Diagnostics FileFileGroupNo.NameDescriptionValuesRead-WriteData Type930 Speed Ref SourceSpeed Reference SourceIndicates the currently selected source for value displayed in P593 [Limited SpdRef]. The Speed Reference Source displays the parameter number that issupplying the speed reference. For example, if Speed Reference Source containsthe value 546, then P546 [Spd Ref A Setpt] is the source of the speed reference.Default:Min/Max:00 / 159999RO32-bitInteger931 Last StartSourceLast Start SourceDisplays the source that initiated the most recent start sequence. All bits in thisparameter are refreshed each time the drive receives a start command.Default:Options:0 = Read Only0 = “Pwr Removed”1-6 = “DPI Port 1-6”7 = “Digital In”8 = “Sleep”9 = “Jog”10 = “Profiling”11 = “AutoRestart”12 = “Pwr Up Start”13 = “Fault”14 = “Enable”15 = “Autotune”16 = “Precharge”17 = “Safety”18 = “Fast Stop”19 = “DPI Port 13”20 = “DPI Port 14”RO32-bitIntegerDIAGNOSTICSStatus932 Last Stop SourceLast Stop SourceDisplays the source that initiated the most recent stop sequence. All bits in thisparameter are refreshed each time the drive receives a stop command.Default:Options:0 = Read Only0 = “Pwr Removed”1-6 = “DPI Port 1-6”7 = “Digital In”8 = “Sleep”9 = “Jog”10 = “Profiling”11 = “AutoRestart”12 = “Pwr Up Start”13 = “Fault”14 = “Enable”15 = “Autotune”16 = “Precharge”17 = “Safety”18 = “Fast Stop”19 = “DPI Port 13”20 = “DPI Port 14”RO32-bitInteger933 Start InhibitsStart InhibitsIndicates which condition is preventing the drive from starting or running.OptionsReservedReservedReservedReservedReservedReservedProfilier (1)SleepSafetyReservedReservedStopPrechargeEnableAlarmFaultedDefault 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 00 = False1 = True(1) 755 drives only.PowerFlex 750-Series User Manual – Publication 750-UM001C-EN-P – September 2009