PowerFlex 750-Series AC Drives User Manual

3-148 Programming and ParametersSafe Speed Monitor ModuleParametersFileGroupNo.NameDescriptionValuesRead-WriteData Type1 PasswordPassword for Lock and Unlock function.Default: N/AMin/Max: 0 / 4,294,967,295ROReal5 Lock StateCommand to lock or unlock the safety option configuration.Default:Options:0 = “Unlock”0 = “Unlock”1 = “Lock”RW Real6 Operating ModeCommand to place the system in Program or Run mode.Default:Options:0 = “Program”0 = “Program”1 = “Run”2 = “Config flt”RW RealHOST GROUPSSecurity7 Reset DefaultsResets safety option to factory defaults.10 Signature IDSafety configuration identifier.13 New Password32-bit configuration password.Default:Options:0 = “No action”0 = “No action”1 = “Reset Fac” (Reset to factorydefaults)Default: N/AMin/Max: 0 / 4,294,967,295Default: N/AMin/Max: 0 / 4,294,967,295RW RealRO RealRW Real17 Password CommandSave new password command.Default:Options:0 = “No action”0 = “No action”1 = “Change PW” (Change Password)2 = “Reset PW” (Reset Password)RW Real18 Security CodeUsed for Reset Password command.Default: N/AMin/Max: 0 / 65,535ROReal19 Vendor PasswordVendor password for Reset Password command.Default: N/AMin/Max: 0 / 65,535RW RealPowerFlex 750-Series User Manual – Publication 750-UM001C-EN-P – September 2009