PowerFlex 750-Series AC Drives User Manual

3-154 Programming and ParametersFileGroupHOST GROUPSMax SpeedNameNo. Description61 Max Speed EnableEnable Safe Maximum Speed Monitoring.62 Safe Max SpeedDefines the maximum speed limit that will be tolerated if Safe Maximum Speedmonitoring is enabled.ValuesDefault:Options:Units:Default:Min/Max:63 Max Spd Stop TypDefault:Defines the safe stop type that will be initiated in the event of a SMS Speed Fault. Options:“Torque Off” (0) – Safe Torque Off With Standstill Checking“Safe Stp Typ” (1) – Safe Torque Off Without Standstill Checking64 Max Accel EnableEnable Safe Maximum Acceleration Monitoring.65 Safe Accel LimitDefines the Safe Maximum Acceleration Limit, relative to encoder 1, for which thesystem is being monitored.Units are based on rotary or linear configuration defined by P29 [Fbk 1 Units].66 Max Acc Stop TypDefines the safe stop type that will be initiated in the event of an AccelerationFault.“Torque Off” (0) – Safe Torque Off With Standstill Checking“Safe Stp Typ” (1) – Safe Torque Off Without Standstill CheckingDefault:Options:Units:Default:Min/Max:Default:Options:0 = “Disable”0 = “Disable”1 = “Enable”RPMmm/s00 / 65,535 RPM0 / 65,535 mm/s0 = “Torque Off”0 = “Torque Off”1 = “Safe Stp Typ”0 = “Disable”0 = “Disable”1 = “Enable”Read-WriteData TypeRW RealRW RealRW RealRW RealRev/s 2RW Realmm/s 200 / 65,535 rev/s 20 / 65,535 mm/s 20 = “Torque Off”0 = “Torque Off”1 = “Safe Stp Typ”RW RealPowerFlex 750-Series User Manual – Publication 750-UM001C-EN-P – September 2009