CANoe DENoe - KEMT FEI TUKE

108
Colors
The grid lines in the graphics display always match the tick marks on the Y-axis.
Grid lines are enabled or disabled by the Grid command in the window's popup
menu.
Here you select the background color for the window (white or black). Furthermore,
you can open the Options dialog for configuring signal colors.
Signal Legend
With this function you choose whether the legend for signals should be displayed
on the left side of the Graphics window or not.
3.4.10 Export of Signals
With the help of this function you can save the data of one or all signals of the Graphics
window to a file. Depending on the activated signal mode (i.e. single-signal or
multisignal mode) the Export either applies to the currently active signal or to all signals.
This function is only available if data exist for the active signal.
CSV format (Comma Separated Values Format) is supported for export. Possible
delimiter symbols are comma, semicolon, tab [TAB] and space [SPACE].
3.4.11 Toolbar of the Graphics Window
The graphics popup menu offers you the option of showing the graphics toolbar either
in the main window or in the graphics windows. If you have the graphics toolbar
shown in the main window, the functions act on the active graphics window. If no
Graphics window is active, the graphics toolbar is deactivated. Click a graphics window
with the mouse to activate it.
3.4.12 Optimization of the Graphics Window
The Graphics window is a very powerful but equally complex window in the measurement
setup. Its performance capabilities are closely interrelated to the graphics
card of your computer and the graphics driver installed. Under certain conditions effects
may occur that disturb the graphics display when working with the window.
Generally these unpleasant effects in the display can be eliminated if you have Windows
redraw the window, for example by modifying the size of the window.
Note: Please make sure that the Graphics window is not covered up by other
measurement windows, menus or dialogs during the measurement. Under
some circumstances the performance capabilities of the output may be
impaired severely by such overlapping.
Depending on the configuration and bus load the powerful symbol algorithms used in
the Graphics window may place a relatively high demand on computer resources.
Since individual requirements vary widely, the Graphics window provides special configuration
options for optimizing the display.
© Vector Informatik GmbH CANoe/DENoe Manual Version 4.1.1