CANoe DENoe - KEMT FEI TUKE

122
Whenever a trigger condition occurs the next message is transmitted. When the end
of the list is reached, transmission may resume at the start of the list, depending on
the configuration.
Since generator blocks can be configured to be very elaborate, the popup menu offers
you the option of saving a generator block as a file and later reloading it, possibly
from a different configuration. As a result, you can easily exchange generator blocks
between different configurations.
Generator blocks are displayed in the data flow diagram as little blocks with the inscription
G.
Figure 70: Generator Block Configuration - Triggering
4.1.1 Configuration of Triggering
In the popup menu select the item Triggering to define a trigger condition for transmission
of messages.
You can select one or more of the three possible conditions by marking the appropriate
check box(es):
• with On Message you indicate which identifier should trigger transmission, and
the delay that should occur.
• with On Key you indicate the key that should trigger
• with On Period you enter the period in milliseconds.
In the line Flow you define whether the transmit list should be run through exactly
once or cyclically.
4.1.2 Configuration of Transmit List
In the popup menu select the item Transmit list or double click the generator block
to create the list of messages to be transmitted:
© Vector Informatik GmbH CANoe/DENoe Manual Version 4.1.1