CANoe DENoe - KEMT FEI TUKE

152
5.7 Overlapping
While creating the panels you can position the panels on top of each other. This sequence
of the elements is called overlap sequence.
If you want to chance the overlap sequence, you have to select an element and place
it in the foreground or in the background.
Initially, when a new element is added to the panel it is placed in the foreground until
the overlap sequence is modified or another element is added.
A marked element is always shown in the foreground, without influencing the actually
overlap sequence of the elements.
Note: In test mode the overlap sequence is always displayed. You can update
the display of overlaps based on the overlap sequence with the function
Update panel.
5.7.1 Transparency Color
Bitmap elements whose transparencies are active allow background bitmaps to show
through in areas of transparency color. Thus, the transparency color remains invisible.
This allows the elements to assume any desired forms.
To draw a bitmap with transparency, fill the areas that are to be transparent with the
transparency color of the panel. In the bitmap element's configuration dialog mark the
check box Transparent Color.
The user can select the panel's transparency color in the dialog of the menu item
Panel Size, Name, Color and Fonts. The default setting of the transparency color is
pure blue (RGB(0,0,255)) and should only be changed if there is good reason to do
so, e.g. to utilize created bitmaps with transparency color in multiple panels. The default
bitmaps of the bitmap elements are based on the default transparency color setting.
Non-bitmap elements, such as push buttons, sliders, input boxes or text boxes, are
not represented in transparency areas for bitmap elements.
5.7.2 Background Bitmaps
Background bitmaps are bitmaps, which are lying for a better layout in the background
of all other elements.
5.8 Test Mode
With the menu item Test│Start or Test│Stop you can activate or deactivate test
mode. In test mode you can monitor the functionality of the controls. However, all
menu commands for configuring the panel are inactive.
In test mode all input and display elements react to user actions in the same way as
during CANoe operation. Values of the assigned environment variables are set or
value changes are displayed.
© Vector Informatik GmbH CANoe/DENoe Manual Version 4.1.1