CANoe DENoe - KEMT FEI TUKE

180
React to all MOST messages
on mostMessage 0x312010
React to message 0x312010 (function block 0x31, function 0x201, operation 0x0)
on mostMessage AudioPlayer_TimePosition_Set
React to message AudioPlayer_TimePosition_Set defined in a CANdb database.
on mostMessage MsgChannel1.*
React to all messages received by channel 1.
on mostMessage MsgChannel1.0x312010
React to message 0x312010 if it is received by channel 1.
on mostMessage 0x22104C,0x312010-0x31201F
React to messages 0x22104C and 0x31201c through 0x31201F.
9.12.3.2 on mostRawMessage
on mostRawMessage is called on the receipt of other MOST frames. These are
RemoteRead, RemoteWrite, Alloc, Dealloc and GetSource. See section 9.12.2 for the
applicable selectors. The command output(this) can be used for forwarding the
message in a node chain.
9.12.3.3 on mostLightLockError
On controller events on mostLightLockError is called. Light, Lock and Error
events will be forwarded automatically.
9.12.4 Functions
9.12.4.1 MostGetFBlockID, MostGetFunctionID, MostGetOpType
long MostGetFBlockID(mostMessage msg)
long MostGetFunctionID(mostMessage msg)
long MostGetOpType(mostMessage msg)
These functions return the FBlockID, FunctionID or OpType of the frame.
Availability: Simulation Setup (any time), Measurement Setup
9.12.4.2 MostSetFBlockID, MostSetFunctionID, MostSetOpType
void MostSetFBlockID(mostMessage msg, long value)
void MostSetFunctionID(mostMessage msg, long value)
void MostSetOpType(mostMessage msg, long value)
Set the FBlockID, FunctionID or OpType of the frame.
Note: Since the FBlockID, FunctionID and OpType are part of the message ID this
functions change the ID as well (see section 9.7.4.1).
Availability: Simulation Setup (any time), Measurement Setup
© Vector Informatik GmbH CANoe/DENoe Manual Version 4.1.1