CANoe DENoe - KEMT FEI TUKE

8.4 LIN Specifications
CANoe.LIN supports the LIN specifications 1.1 and 1.2.
With the new database attribute "LinProtocolVersion" you can switch between the LIN
specifications.
8.5 The Converter Tool LDF to DBC
With the included LDF to DBC Converter the LIN Description Files (*.LDF) can be
directly converted into CANdb database files (*.DBC).
Important features of the converter are:
• The converter accepts files in conformity with LDF specifications 1.1 and 1.2.
• The converter performs a strict test of syntax, but does allow for a few additions/deviations,
which nevertheless will generate warnings.
165
• The converter performs a partial semantic test as well.
Thus, references to undefined identifiers (nodes, signals, etc.) will generate an
error, for example.
• Scheduler tables are stored in attributes.
8.6 Trace Window for Option .LIN
Configuring the Trace window you can (also) choose LIN specific fields to be displayed.
For Option .LIN the following columns are available in the trace window:
Field Title Function
Time Time Absolute time from the measurement start, or relative
time from the previous event
Channel Chn LIN channel. Number of the channel on which the
message was sent/received
Identifier ID Identifier of the message
Name Name Symbolic name of the message
ID/Name ID/Name Depending on the global setting, either the symbolic
name or the identifier of the message
Dir Dir TX = Transmit message,
RX = Receive message
DLC DLC Length of the data field
Data Data The data in decimal or hexadecimal representation
Protocol
time
Full time Duration of the entire bus event (for example message,
transmission error, reception error) in bit times
HH:MM:SS HH:MM:SS Absolute time from the measurement start in
hh:mm:ss.000-format (24h)
Diff time Diff time Relative time to the previous event
© Vector Informatik GmbH CANoe/DENoe Manual Version 4.1.1