CANoe DENoe - KEMT FEI TUKE
CANoe DENoe - KEMT FEI TUKE
CANoe DENoe - KEMT FEI TUKE
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
72<br />
Example:<br />
The signal Enginedata.rpm is defined as a 16-bit unsigned value with an offset<br />
of 0 and a factor of 10. If 1015 is input as the comparison value, the raw value<br />
would have to be 1015/10 = 101.5. Since only discrete values may occur, either<br />
101 or 102 is used, which corresponds to physical values of 1010 or 1020, respectively.<br />
It is these two values that appear in the two information boxes.<br />
In spite of discrete saving, valid values may still have digits after the decimal<br />
point. If a factor of 10.5 were used in the above example, then 1008 and 1018.5<br />
would be recommended as possible values.<br />
You can also enter a time range for each primitive, within which it should be active.<br />
Outside of this time range the condition would never be satisfied.<br />
2.7.6 Exporting and Converting Log Files<br />
The contents of log files can be exported or converted to other file formats with the<br />
help of signal-based Logging Export. The configuration dialog for Logging Export is<br />
opened by choosing the Export menu item in the popup menu of the File icon to the<br />
right of the Logging block.<br />
2.7.6.1 Export<br />
The export can be limited to specific signals. To do this, the desired signals must be<br />
selected in the Signals selection list.<br />
In the Expanded Options dialog that is opened by pressing the [Expanded] button<br />
in the Logging Export Configuration dialog, the user can define in the Actions field<br />
those programs that can be started after an export.<br />
2.7.6.2 Conversion<br />
Conversion of log files is supported in both directions, i.e. ASCII->Binary and Binary->ASCII.<br />
2.7.7 CANlog support<br />
CANlog is a programmable data logger for CAN systems. CAN messages of different<br />
CAN devices can be received and stored. Also trigger conditions created in <strong>CANoe</strong><br />
can be exported directly to CANlog.<br />
Choose in the context menu Export to CANlog<br />
• Export to file, to create a CANlog configuration file<br />
• Export to device, to configure the CANlog hardware directly with the trigger<br />
conditions created in <strong>CANoe</strong><br />
More information about CANlog support you can find in the <strong>CANoe</strong> online help.<br />
© Vector Informatik GmbH <strong>CANoe</strong>/<strong>DENoe</strong> Manual Version 4.1.1
Change language