CANoe DENoe - KEMT FEI TUKE

Figure 40: Message and Signal Explorer
If the database has been filled out completely, you can search in this Explorer for e.g.
a node, a message or even a list of all signals in the database.
Please refer to online Help for further instructions on using the Message Explorer and
Signal Explorer.
2.3.3 Associating the Database
Please use the simulation setup to edit databases (add, assign, delete, etc.). In the
System View window of the Simulation setup you can see a tree view of the current
configuration.
If you go to Databases with the mouse pointer and click on the right mouse button,
you can run the command Add… from the context menu. This adds a database (or
an additional database) to the current bus.
After you have run the command, the Open window appears and you can select a
database.
If you click on the [OK] button, the new database is accepted for the current bus and
is displayed in the System View window.
With the Edit… command of the context menu you start the CANdb++ Editor. There
you can edit and save the selected database.
The name of the database is determined as follows. If the database includes the at-
© Vector Informatik GmbH CANoe/DENoe Manual Version 4.1.1
47