CANoe DENoe - KEMT FEI TUKE

For examples of interactive generator block implementation please refer to the
CANoe Help function.
4.2.1 Configuring the Interactive Generator Block
127
The configuration dialog is subdivided into a Transmit List (upper half of window)
and a Signal List (lower half of window). In the Transmit List you can select individual
messages and configure them. Assigned to each message is a Signal List in
which signal values can be configured.
Figure 73: Configuration of the Interactive Generator Block
All input boxes are explained in the status bar at the lower border of the dialog. The
explanation is always shown for the currently selected box entry. There are also keyboard
shortcuts for use without the mouse; these are described in section 4.2.1.7.
4.2.1.1 Transmit List
The list of messages to be sent (Transmit list) is available in two views: Rows and All
Columns.
In the Rows view the most important columns of the transmit list are summarized in
an easy-to-read format, while in the All Columns view even seldomly used message
parameters and trigger conditions appear. The widths of the columns can be adjusted
from their borders.
The [Layout] button is used to have the columns automatically configured to the
most easy-to-read layout.
The [New] button is used to input messages in the transmit list. The procedure differs
depending on whether or not a database is associated to the CANoe configuration:
If there is a database, messages from the database can be added to the transmit list.
Clicking the [New] button opens the Message Explorer with which messages can be
selected symbolically. They are then assumed in the transmit list. Afterwards the sig-
© Vector Informatik GmbH CANoe/DENoe Manual Version 4.1.1