0. Introducción - RiuNet - Universidad Politécnica de Valencia

III. Experimental. 169
[14] Marín, M. L., López, J., Vilaplana, J. and Jiménez, A. (1998). "Study of the
influence of Heating Rate in Degradation Parameters of Common Polymers."
Recent Research Developments in Macromolecules Research, 3, 159 - 170.
[15] Basan, S. and Güven, O. (1986). "A comparison of Various Isothermal
Thermogravimetric Methods Applied to the Degradation of PVC."
Thermochimica Acta, 106, 169 - 178.
[16] Gao, X., Chen, D. and Dollimore, D. (1993). "The effect of the Reaction Heat on
Kinetic Analysis by TG under a Rising Temperature Program. Part 1."
Thermochimia Acta, 215, 83-95.
[17] Gao, X., Chen, D. and Dollimore, D. (1993). "The Effect of the Reaction Heat on
Kinetic Analysis by TG under a Rising Temperature Program. Part 2."
Thermochimia Acta, 215, 96-106.
[18] Carrasco, F. (1993). "The Evaluation of Kinetic Parameters from
Thermogravimetric Data: Comparison Between Established Methods and the
General Analytical Equation." Thermochimia Acta, 214, 115-134.
[19] Wilkie, C. A. (1999). "TGA/FTIR: an Extremely Useful Technique for Studying
Polymer Degradation." Polymer Degradation and Stability, 66, 301-306.
[20] Cheng, S. and Wunderlich, B. Z. (1988). "Thermal Analysis of Thermoplastic
Polymers." Thermochimica Acta, 134, 161 - 166.
[21] Hobbs, S. Y. and Watkins, V. H. (1999). "Morphology Characterization by
Microcopy Techniques - Polymer Blends." Ed. Willey-Interscience, 1 (cap 9).
[22] Lyngaae-Jorgensen, J., Rasmussen, K. L., Chtcherbakova, E. A. and Utracki, L.
A. (1999). "Flow Induced Deformation of Dual-Phase Contiunuity in Polymer
Blends and Alloys. Part I." Polymer Engineering and Science, 39, 1060 - 1071.
[23] Chu, J. and Sullivan, J. L. (1996). "Recyclability of a Continuous E-Glass Fiber
Reinforced Polycarbonate Composite." Polymer Composites, 17 (4), 556-566.
[24] Seo, Y. and Kim, H. J. (2002). "Effect of a Compatibilizer on the Structural
Development of a Thermotropic Liquid Crystalline Polymer/Polystyrene Blend."
Polymer Engineering and Science, 42 (5), 951-960.
[25] Zagorski, D. L., Vilensky, A. I., Kosarev, S. A., Miterev, A. M., Zhdanov, G. S.
and Mchedlishvili, B. V. (2003). "AFM method for investigation of irradiated
polymers." Radiation Measurements, 36 (1-6), 233-237.