0. Introducción - RiuNet - Universidad Politécnica de Valencia

IV. Resultados y discusión. 328
[14] Robeson, L. M. and Berner, R. A. (2001). "Mechanical Properties of Emulsion
Polymer Blends." Journal of Polymer Science: Part B: Polymer Physics, 39,
1093–1106.
[15] Vaccaro, E., Dibenedetto, A. T. and Huang, S. J. (1997). "Yield Strength of
Low-Density Polyethylene–Polypropylene Blends." Journal of Applied Polymer
Science, 63 (3), 275-281.
[16] Jin, D. W., Shon, K. H., Kim, B. K. and Jeong, H. M. (1998). "Compatibility
enhancement of ABS/PVC blends." Journal of Applied Polymer Science, 70 (4),
705-709.
[17] Plochocki, A. (1978). Polymer Blends, Academic Press, New York, 2.
[18] Liu, G. D., Chen, Y. Z. and Li, H. L. (2004). "Study on processing of ultrahigh
molecular weight polyethylene/polypropylene blends: Capillary flow properties
and microstructure." Journal of Applied Polymer Science, 92 (6), 3894-3900.
[19] Nishimura, T. (1984). "Capillary flow behavior of bicomponent polymer blends."
Rheologica Acta (23), 617-626.
[20] Chowdhury, R., Banerji, M. S. and Shivakumar, K. (2007). "Polymer blends of
carboxylated butadiene-acrylonitrile copolymer (nitrile rubber) and polyamide 6
developed in twin screw extrusion." Journal of Applied Polymer Science, 104
(1), 372-377.
[21] Utracki L.A. , K. M. R. (2002). "The Rheology of Polymer Blends and Alloys "
Polymer Blends Handbook, 1, 449-546.
[22] Santana, R. and Manrich, S. (2003). "Morphology and mechanical properties of
polypropylene/high-impact polystyrene blends from postconsumer plastic
waste." Journal of Applied Polymer Science, 88 (13), 2861-2867.
[23] Rek, V., Grguric, T., Jelcic, Z. and Hace, D. (2004). "Effect of
styrene/ethylene/butylenelstyrene block copolymer on the dynamic mechanical
behaviour and processability of high-impact polystyrene." E-Polymers.
[24] Silberberg, J. and Han, C. D. (1978). "Effect of Rubber Particle-Size on
Mechanical-Properties of High-Impact Polystyrene." Journal of Applied Polymer
Science, 22 (3), 599-609.
[25] Park, J. H., Sung, Y. T., Kim, W. N., Hong, J. H., Hong, B. K., Yoo, T. W. and
Yoon, H. G. (2005). "Effects of blend Composition and Compatibilizer on the
Mechanical Properties of Polypropylene/Acrylonitrile-Butadiene-Styrene
Blends." Polymer Korea, 29 (1), 19-24.
[26] Cicloplast. (2004). "Informe anual 2004."