TC Systems, Inc. South Carolina - AT&T Clec Online

Version 3Q03: 11/12/2003
BST 09/29/05 AL
Attachment 2
Page 29
access to the same detailed information via that OSS at the rates set forth in
Exhibit A to this attachment.
2.3.11 If DS3/STS-1 Loops are not readily available but can be made available through
routine network modifications, as defined by the FCC, TC SYSTEMS may request
BellSouth to perform such routine network modifications. The request may not be
used to place fiber cable. BellSouth will provide a price quote for the request, and
upon receipt of authorization by TC SYSTEMS and an error free LSR from TC
SYSTEMS, BellSouth shall perform the routine network modifications within
BellSouth’s standard Loop provisioning interval. Where BellSouth has recovered
the costs for a routine network modification through its recurring and nonrecurring
charges for the element provided, BellSouth will not seek to double recover such
costs.
2.3.12 S3 services come with a test point and a DLR. Mileage is airline miles, rounded
up and a minimum of one mile applies. BellSouth TR LightGate® 73501 Service
Interface and Performance Specifications, Issue D, June 1995 applies to DS3
services.
2.3.13 TC SYSTEMS may obtain a maximum of a single Unbundled DS3 Loop to any
single building in which DS3 Loops are available as Unbundled Loops.
2.3.14 TC SYSTEMS may access a total capacity of two (2) DS3s per end user location
at the Network Element rates set forth in Exhibit A.
2.4 Unbundled Copper Loops (UCL)
2.4.1 BellSouth shall make available Unbundled Copper Loops (UCLs). The UCL is a
copper twisted pair Loop that is unencumbered by any intervening equipment (e.g.,
filters, load coils, range extenders, digital loop carrier, or repeaters) and is not
intended to support any particular telecommunications service. The UCL will be
offered in two types – Designed and Non-Designed.
2.4.2 Unbundled Copper Loop – Designed (UCL-D)
2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop
that is unencumbered by any intervening equipment (e.g., filters, load coils, range
extenders, digital loop carrier, or repeaters).
2.4.2.2 A UCL-D will be provisioned according to Resistance Design parameters for non-
loaded Loop facilities and will have up to 1300 Ohms of resistance.
2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes
standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is
CCCS 110 of 433