TC Systems, Inc. South Carolina - AT&T Clec Online

Version 2Q03: 07/21/03
Attachment 4 - Remote Site
Page 22
7.10 Cancellation. If at any time prior to space acceptance, TC SYSTEMS cancels its
order for the Remote Collocation Space(s) (Cancellation), BellSouth will bill the
applicable nonrecurring rate(s) as set forth in Exhibit B for any and all work processes
for which work has begun or been completed. In no event will the charges billed by
BellSouth exceed the maximum amount TC SYSTEMS would have otherwise paid for
the work undertaken by BellSouth if no cancellation of the order had occurred.
7.11 Licenses. TC SYSTEMS, at its own expense, will be solely responsible for obtaining
from governmental authorities, and any other appropriate agency, entity, or person, all
rights, privileges, and licenses necessary or required to operate as a provider of
telecommunications services to the public or to build-out, equip and occupy the
Remote Collocation Space.
7.12 Environmental Hazard Guidelines. The Parties agree to utilize and adhere to the
Environmental Hazard Guidelines identified in Exhibit A attached hereto.
8 Rates and Charges
8.1 Application Fee. BellSouth shall assess an Application Fee via a service order, which
shall be issued at the time BellSouth responds that space is available pursuant to
Section 6.9 (Application Response). This nonrecurring fee will be billed by BellSouth
on the date that BellSouth provides an Application Response.
8.2 Rack/Bay Space. The rack/bay space charge includes reasonable charges for air
conditioning, ventilation and other allocated expenses associated with maintenance of
the Remote Site Location, and includes amperage necessary to power TC SYSTEMS’s
equipment. TC SYSTEMS shall pay rack/bay space charges based upon the number of
racks/bays requested. BellSouth will assign Remote Collocation Space in conventional
remote site rack/bay lineups where feasible.
8.3 Power. BellSouth shall make available –48 Volt (-48V) DC power for TC
SYSTEMS’s Remote Collocation Space at a BellSouth Power Board or BellSouth
Battery Distribution Fuse Bay (BDFB) at TC SYSTEMS’s option within the Remote
Site Location. The charge for power shall be assessed as part of the recurring charge
for rack/bay space. If the power requirements for TC SYSTEMS’s equipment exceeds
the capacity available, then such power requirements shall be assessed on an individual
case basis. BellSouth will revise recurring power charges to reflect a power upgrade
upon notification of the completion of the upgrade by TC SYSTEMS’s BellSouth
Certified Vendor. BellSouth will revise recurring power charges to reflect a power
reduction upon BellSouth’s receipt of the Power Reduction Form from TC SYSTEMS
certifying the completion of the power reduction, including the removal of the power
cabling by TC SYSTEMS’s BellSouth Certified Supplier.
CCCS 294 of 433