TC Systems, Inc. South Carolina - AT&T Clec Online
TC Systems, Inc. South Carolina - AT&T Clec Online
TC Systems, Inc. South Carolina - AT&T Clec Online
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Version 2Q03: 07/21/03<br />
Attachment 4 - Remote Site<br />
Page 20<br />
7.3 Joint Planning. Joint planning between Bell<strong>South</strong> and <strong>TC</strong> SYSTEMS will commence<br />
within a maximum of twenty (20) calendar days from Bell<strong>South</strong>'s receipt of a BFFO.<br />
Bell<strong>South</strong> will provide the preliminary design of the Remote Collocation Space and the<br />
equipment configuration requirements as reflected in the Bona Fide application and<br />
affirmed in the BFFO. The Remote Collocation Space completion time period will be<br />
provided to <strong>TC</strong> SYSTEMS during joint planning. The Remote Site Collocation Space<br />
completion interval as already provided for in Section 7.1. will not change.<br />
7.4 Permits. Each Party or its agents will diligently pursue filing for the permits required<br />
for the scope of work to be performed by that Party or its agents within ten (10)<br />
calendar days of the completion of finalized construction designs and specifications.<br />
7.5 Acceptance Walkthrough. <strong>TC</strong> SYSTEMS will schedule and complete an acceptance<br />
walkthrough of each Remote Collocation Space with Bell<strong>South</strong> within fifteen (15)<br />
calendar days of Bell<strong>South</strong>’s notifying <strong>TC</strong> SYSTEMS that the Remote Collocation<br />
Space is ready for occupancy. In the event that <strong>TC</strong> SYSTEMS fails to complete an<br />
acceptance walkthrough within this fifteen (15) calendar day interval, the Remote<br />
Collocation Space shall be deemed accepted by <strong>TC</strong> SYSTEMS on the Space Ready<br />
Date. Bell<strong>South</strong> will correct any deviations to <strong>TC</strong> SYSTEMS’s original or jointly<br />
amended requirements within seven (7) calendar days after the walkthrough, unless the<br />
Parties jointly agree upon a different time frame.<br />
7.6 Use of Bell<strong>South</strong> Certified Supplier. <strong>TC</strong> SYSTEMS shall select a supplier which has<br />
been approved by Bell<strong>South</strong> to perform all engineering and installation work <strong>TC</strong><br />
SYSTEMS and <strong>TC</strong> SYSTEMS’s Bell<strong>South</strong> Certified Supplier must follow and<br />
comply with all Bell<strong>South</strong> requirements outlined in Bell<strong>South</strong>’s TR 73503, TR 73519,<br />
TR 73572, and TR 73564. In some cases, <strong>TC</strong> SYSTEMS must select separate<br />
Bell<strong>South</strong> Certified Suppliers for transmission equipment, switching equipment and<br />
power equipment. Bell<strong>South</strong> shall provide <strong>TC</strong> SYSTEMS with a list of Bell<strong>South</strong><br />
Certified Suppliers upon request. The Bell<strong>South</strong> Certified Supplier(s) shall be<br />
responsible for installing <strong>TC</strong> SYSTEMS’s equipment and components, extending<br />
power cabling to the Bell<strong>South</strong> power distribution frame, performing operational tests<br />
after installation is complete, and notifying Bell<strong>South</strong>’s Outside Plant engineers and<br />
<strong>TC</strong> SYSTEMS upon successful completion of installation. The Bell<strong>South</strong> Certified<br />
Supplier shall bill <strong>TC</strong> SYSTEMS directly for all work performed for <strong>TC</strong> SYSTEMS<br />
pursuant to this Attachment, and Bell<strong>South</strong> shall have no liability for nor responsibility<br />
to pay such charges imposed by the Bell<strong>South</strong> Certified Supplier. Bell<strong>South</strong> shall<br />
make available its supplier certification program to <strong>TC</strong> SYSTEMS or any supplier<br />
proposed by <strong>TC</strong> SYSTEMS and will not unreasonably withhold certification. All<br />
work performed by or for <strong>TC</strong> SYSTEMS shall conform to generally accepted industry<br />
standards.<br />
7.7 Alarm and Monitoring. Bell<strong>South</strong> may place alarms in the Remote Site Location for<br />
the protection of Bell<strong>South</strong> equipment and facilities. <strong>TC</strong> SYSTEMS shall be<br />
responsible for placement, monitoring and removal of environmental and equipment<br />
CCCS 292 of 433
Change language