TC Systems, Inc. South Carolina - AT&T Clec Online

Version 3Q03: 11/12/2003
BST 09/29/05 AL
Attachment 2
Page 36
2.8.2.3.1 If TC SYSTEMS requests a UCSL and a non-loaded pair is not available, TC
SYSTEMS may order unbundled subloop modification on an existing facility. If
load coils are removed from any existing subloop, that subloop will be classified as
a UCSL. TC SYSTEMS may order, at its option the LMU, at the applicable rates,
to determine what Loop modifications will be required, and should TC SYSTEMS
request a Loop that requires modification, TC SYSTEMS will be charged the
applicable rate for that Loop modification.
2.8.2.4 Unbundled Sub-Loop Distribution – Intrabuilding Network Cable (USLD-INC) is
the distribution facility owned or controlled by BellSouth inside a building or
between buildings on the same property that is not separated by a public street or
road. USLD-INC includes the facility from the cross connect device which will be
at or near the Minimum Point of Entry (MPOE) or in the building equipment
room, as applicable, up to and including the Loop demarcation point on an end
user’s premises.
2.8.2.4.1 Upon request for USLD-INC from TC SYSTEMS, BellSouth will install a cross
connect panel which will be at or near the Minimum Point of Entry (MPOE) or in
the building equipment room, as applicable, for the purpose of accessing USLD-
INC pairs. The cross connect panel will function as a single point of
interconnection (SPOI) for USLD-INC and will be accessible by multiple carriers
as space permits. BellSouth will place cross-connect blocks for TC SYSTEMS’s
use on this cross-connect panel. TC SYSTEMS will be responsible for connecting
its facilities to the cross-connect block(s).
2.8.2.5 For access to USLD and UCSL, TC SYSTEMS shall install a cable to the
BellSouth cross-box in the field to provide continuity to TC SYSTEMS’s feeder
facilities pursuant to the terms and conditions for physical collocation for remote
sites set forth in this Agreement. At TC SYSTEMS’s option, this cable would be
connected in a nondiscriminatory manner by an TC SYSTEMS or BellSouth
technician within the BellSouth cross-box during the set-up process. TC
SYSTEMS’s cable pairs can then be connected to BellSouth’s USLD within the
BellSouth cross-box by the technician.
2.8.2.6 Through the SI process, BellSouth will determine whether access to Unbundled
Sub-Loops at the location requested by TC SYSTEMS is technically feasible and
whether sufficient capacity exists in the cross-box. If existing capacity is sufficient
to meet TC SYSTEMS’s request, BellSouth will perform the set-up as set forth in
the CLEC Information Package.
2.8.2.7 The site set-up must be completed before TC SYSTEMS can order sub-loop
pairs. For the site set-up in a BellSouth cross-connect box in the field, BellSouth
will perform the necessary work to splice TC SYSTEMS’s cable into the crossconnect
box. For the site set-up inside a building equipment room, BellSouth will
perform the necessary work to install the cross-connect panel and the connecting
CCCS 117 of 433