BIBLIOGRAPHIE 199 [87] K. D. Van, Macro-micro approach in high-cycle multiaxial fatigue, In : D. L. Mc Dowell and R. Ellis Eds. Advances in Multiaxial Fatigue, ASTM-STP, n˚1191, 1993, pp. 120–130. [88] J. A. Greenwood, The area of contact between rough surfaces and flats, J. Lubr. Technol, 1967, vol. 89, p. 81. [89] E. S. Ga<strong>de</strong>lmawla, M. M. Koura, T. M. A. Maksoud, I. M. Elewa, H. H. Soliman, Roughness parameters, Journal of Materials Processing Technology, 2002, vol. 123, pp. 133–145. [90] V. Lamacq, Amorçage et propagation <strong>de</strong> fissures <strong>de</strong> fatigue sous conditions <strong>de</strong> fretting : Approche théorique et expérimentale, Thèse <strong>de</strong> Doctorat, Lyon : Insa Lyon, 1997, 252 p. [91] D. R. Swalla, R. W. Neu, Fretting damage assessment of titanium alloys using orientation imaging microscopy, In : Proceedings of the 4th International Symposium on Fretting Fatigue, 2004. [92] Aluminium-Verlag, Düsseldorf, Material data of high-strength aluminium alloys for durability evaluation of structures, Second edition, 1985. [93] T. Warner, R. Dif, J.-C. Ehrstrom, P. Lassince, Improved durability aluminium alloys for airframe structures, In : Proceedings of the RTO AVT workshop on ŞNew metallic Materials for the Strucure of Aging AircraftŤ, held in Corfu, Greece, 2000. [94] J. Schijve, Fatigue of Structures and Materials, Kluwer Aca<strong>de</strong>mic Publishers, 2001, 513 p. ISBN 792370147 [95] C. Me<strong>un</strong>ier, Etu<strong>de</strong> par éléments finis <strong>de</strong> la <strong>fissuration</strong> d’<strong>un</strong> <strong>alliage</strong> d’aluminium sous chargement <strong>de</strong> fretting wear, Rapport <strong>de</strong> DEA, Lyon : Laboratoire <strong>de</strong> Tribologie et <strong>de</strong> dynamique <strong><strong>de</strong>s</strong> systèmes, Ecole Centrale <strong>de</strong> Lyon, 2004, 91 p. [96] N. Gerard, Etu<strong>de</strong> du comportement <strong><strong>de</strong>s</strong> fissures courtes au fonc d’<strong>un</strong>e entaille mécanique sous sollicitation <strong>de</strong> fatigue, Thèse <strong>de</strong> Doctorat, Tours : Université <strong>de</strong> Tours, 2003, 180 p. [97] M. Nakai, T. Eto, New aspects of <strong>de</strong>velopment of high strength aluminium alloys for aerospace applications, Material Science and Engineering, 2000, vol. A285, pp. 62–68. [98] M. Szolwinski, T. N. Farris, Analysis and prediction of fretting fatigue in 2024-T351 aluminium alloy, Wear, 1998, vol. 221, pp. 24–36. [99] V. Fridrici, Fretting d’<strong>un</strong> <strong>alliage</strong> <strong>de</strong> titane revêtu et lubrifié, Thèse <strong>de</strong> Doctorat, Lyon : Ecole Centrale <strong>de</strong> Lyon, 2002, 200 p. [100] J. A. Araujo, D. Nowell, The effect of rapidly varying contact stress fields on fretting fatigue, International Journal of Fatigue, 2002, vol. 24, pp. 763–775.
200 BIBLIOGRAPHIE [101] H. F. Bueckner, A novel principle for the computation of stress intensity factors, Zeitschrift für Angewandte Mathematik <strong>un</strong>d Mechanik, 1970, vol. 50, pp. 529–546. [102] CeCILL, Licence fançaise <strong>de</strong> logiciel libre [en ligne], Disponible sur : (consulté le 25/11/04). [103] A. Fazekas, Etu<strong>de</strong> <strong>de</strong> l’influence <strong><strong>de</strong>s</strong> dispersions microstructurales sur les propriétés effectives <strong><strong>de</strong>s</strong> matériau cellulaires, Thèse <strong>de</strong> Doctorat, Grenoble : INPG, 2003, 223 p. [104] I. S. Raju, J. C. Newman, Computational methods in the mechanics of fracture, Elsevier, 1986. [105] H. Proudhon, Modélisation du fretting par éléments finis avec le logiciel ABAQUS, Laboratoire <strong>de</strong> Tribologie et <strong>de</strong> Dynamique <strong><strong>de</strong>s</strong> systèmes, Ecole Centrale <strong>de</strong> Lyon, 2004, 70 p.