Introduction to the Agilent 7100 Capillary Electrophoresis System

7 Hardware Information
Changing the Fuses for the Power Supplies
Changing the Fuses for the Power Supplies
Prior to changing fuses, you must switch the instrument off and disconnect it
from the line power.
Fuses are located on the back right side of the instrument. Replace fuses with
identical part numbers as specified under “7100 Capillary Electrophoresis
Instrument Electronics” on page 173.
WARNING
Fire hazard
Using wrong fuses can result in fire hazard.
• For continued protection against fire hazard, replace fuses only with the same type
and ratings.
• Only use the fuses specified for this instrument. The use of other fuses or materials
is prohibited.
182 Agilent 7100 Capillary Electrophoresis System User Manual