Introduction to the Agilent 7100 Capillary Electrophoresis System
Introduction to the Agilent 7100 Capillary Electrophoresis System
Introduction to the Agilent 7100 Capillary Electrophoresis System
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Site Requirements and Specifications 2<br />
Physical Specifications<br />
Physical Specifications<br />
Table 2<br />
Physical specifications<br />
Type Specification Comments<br />
Weight<br />
Dimensions<br />
(width × depth × height)<br />
35 kg (77.2 lbs)<br />
350 x 510 x 590 mm<br />
(13.8 x 20.1 x 23.2 inches)<br />
Line voltage 100–240 VAC ± 10% Wide-ranging capability<br />
Line frequency 50 or 60 Hz ± 5%<br />
Power consumption 350 VA / 300 W / 1024 BTU/h Maximum<br />
Ambient operating<br />
temperature<br />
Ambient non-operating<br />
temperature<br />
5–40 °C (41–104 °F)<br />
-40 <strong>to</strong> 70°C (-40 <strong>to</strong> 158 °F)<br />
Humidity below 80% at 31 °C (87.8 °F) Non-condensing<br />
Operating altitude<br />
External cooling<br />
Up <strong>to</strong> 2000 m (6500 ft)<br />
max. 0.5 bar (7.2 psi),<br />
max. 50 °C (122 °F)<br />
Waterbath<br />
External pressure 2-12 bar (29-174 psi) Oil-free air or nitrogen<br />
Safety standards: IEC,<br />
CSA, UL<br />
Housing<br />
Installation category II,<br />
Pollution degree 2<br />
All materials are recyclable<br />
For indoor use only<br />
For applications run in CEC mode (<strong>Capillary</strong> Electrochroma<strong>to</strong>graphy) or CE+p<br />
mode (<strong>Capillary</strong> <strong>Electrophoresis</strong> mode with optional usage of higher pressure), an<br />
external pressure supply of oil-free air or nitrogen with a maximum pressure of 15<br />
bar (218 psi) can be used. A respective male adapter that fits in<strong>to</strong> <strong>the</strong> instrument’s<br />
female adapter and PTFE tubing are part of <strong>the</strong> shipment.<br />
NOTE<br />
The <strong>Agilent</strong> <strong>7100</strong> <strong>Capillary</strong> <strong>Electrophoresis</strong> <strong>System</strong> is designed <strong>to</strong> operate in a typical<br />
electromagnetic environment where RF transmitters, such as mobile phones, should not be<br />
used in close proximity.<br />
<strong>Agilent</strong> <strong>7100</strong> <strong>Capillary</strong> <strong>Electrophoresis</strong> <strong>System</strong> User Manual 21
Change language