Introduction to the Agilent 7100 Capillary Electrophoresis System

LAN Configuration 4
Manual Configuration
3 Type
?
and press [Enter] to see the available commands.
Figure 10
Telnet commands
Table 21
Telnet commands
Value
Description
? Displays syntax and descriptions of commands
/ Displays current LAN settings
ip
sm
gw
exit
Sets new IP address
Sets new subnet mask
Sets new default gateway
Exits shell and saves all changes
4 To change a parameter follows the style:
• parameter value, for example:
ip 134.40.27.230
Then press [Enter]; parameter refers to the configuration parameter you are
defining, and value refers to the definitions you are assigning to that
parameter. Each parameter entry is followed by a carriage return.
Agilent 7100 Capillary Electrophoresis System User Manual 73