Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1The focus of the MCS Labels dialogue will change to the Locate To timewhich will show the timecode of the selected Label (or zero if no Label hasbeen selected).> Use the mouse or the keyboard to adjust the timecode manually (usethe Cancel key to undo changes to the timecode), then either:• Click the Locate button• Press the LOC key• Press the Enter key, or• Press the Play key.The transport will wind or rewind to the required time.If the Play key was used, it will drop into play.The Label List can also be used to create or edit a label if there is no labelwith the required timecode.To Modify a Label> Click on the required Label in the Label List dialogue box.The label will appear in the Selected Label box.> Modify the entry in the Selected Label box, change the Timecodemanually as required and then click the Update button.The label will be changed in the list.To Delete a Label> Click on the required Label in the Label List dialogue box so it appearsin the Selected Label box.> Click the Delete button and the label will be removed from the list.To Delete all Labels> Click the Delete All button in the Label List dialogue box.All labels will be deleted.Capture TimecodeAllows the current Timecode value to be captured and stored in TimecodePreset A.To Capture Timecode> Click on Capture Timecode in the drop down Tools Menu or press Ctrl/K on the keyboard.The current Timecode (as displayed on the main Encore screen) will bestored in Timecode Preset A.- 100 -