Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1Timecode OptionsUsed to set timecode type, timecode display options, local zero times andto create timecode presets (for later recall).To launch Timecode Options:> Click on Timecode Options in the Options drop down menu.> Click on the Timecode Icon.> Press f10 on the keyboard, or> Click on the timecode field in the Encore screen.The Timecode Options dialogue box will be displayed.Timecode TypeUsed to set the frame rate for incoming Timecode.> To set the Timecode type, click on the radio button for the requiredtimecode.The choices are 24, 25, 29.97 (Drop or Non-Drop) and 30 frames persecond.Encore does not automatically determine the incoming code type, so it isadvisable to verify the timecode type before mixing.If incoming Timecode differs from the selected type then a message willappear to inform the user.Local ZeroUsed to display the running time of a Mix instead of the Timecode in use.When Local Zero is activated running code will be offset so that thechosen point is displayed as 00:00:00:00 in all Timecode fields.> To set Local Zero, enter the desired timecode in the Local Zero boxeither manually or by clicking on Select From List and making a selectionfrom the Select A Label dialogue box.When the cursor is placed and clicked in the timecode area of the LocalZero box it will change to a + or - sign allowing the user to increment ordecrement the displayed times using the mouse button.> Click on Local Zero On.Local Zero is saved and automatically reloaded with the Mix.Display optionsUsed to set the display format for Timecode within Encore.To set the timecode display options, click on the required display settingsin the Display Options box.TimecodeTimecode will be displayed in HH:MM:SS:FF format.• Hide Frames suppresses the display of frames on the screen.• Hide Hours suppresses the display of hours on the screen.- 85 -