Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1Erase Path DataThis used to delete automation data (fader moves, mute events, channelbutton events etc) from selected paths.Automation can be erased over any period in timecode, although thetimeline itself is not affected in any way.It does not alter the designated Mix/Pass, but it will create a new mix(displayed in the Mix/Pass area of the main screen).Under Include, select which parts of the automation are to be erased (atleast one item must be checked).> Enter the crossfade time in the Splice Mode box.Only one xFade time can be used at present.This will be used at both the beginning and the end of the timecode range.> Enter the Erase From and Erase To times in the Set Times box eithermanually or clicking on Select From List and selecting the times in theStart and End Times dialogue box.> Click the Whole Mix button to set the start to zero and the end to23:59:59:24.> Click the required paths in the Paths list (click the Select All orDeselect All buttons to select all / deselect all paths.).The selected paths will be highlighted.> To create the new mix pass, click the Erase button.The Erase Path Data dialogue box will close and a dialogue box willappear confirming that a new Mix/Pass was created.The new Mix/Pass is automatically selected as the Play Pass.- 47 -