Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1Activate Hold RecallHold Recall scans the current Channel module and displays the controlswhich need adjusting.After making adjustments, you must then manually select the requiredChannels that you wish to Reset.Recall is then Deactivated when all the required Channels have beenreset.> Select Activate Hold Recall from the drop down Activation Menu.The console will be muted and Recall will scan the currently displayedChannel Module/Monitor section.If the View Menu has been used to disable the display of any Channelmodule sections, then these sections will be ignored by the scan.If any controls do not match the currently loaded Store, Recall will displaythe section(s) / controls which do not match.As each control is reset it will be removed from the display.When all controls in a section are reset, the section will be replaced bytext indicated the section is reset.When all controls on a Channel module or the Monitor section have beenreset, Recall will display All Controls Reset next to the Channel number.> When all the required Channels have been reset, select DeactivateRecall from the drop down Activation Menu.Deactivate RecallDeactivate is used to turn off Auto Recall and Hold Recall.It would normally be used to turn off Hold Recall, because Hold Recalldoes not turn itself off automatically.> Select Deactivate Recall from the Activation Menu, and Recall willstop scanning the console.The screen will revert to displaying the control settings in the currentStore.- 127 -