Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1Each Track and each mono Group also has a icon at the bottom of eachstrip which shows the speaker that the path will route to when used in afilm stem.The default speaker output is mono.To select the Speaker position individually> Click on the required path, and click on Pan Designators.The Pan Designators dialogue box will appear.> Click the required speaker position then click OK.The box at the bottom of the path will indicate the selected speaker.To automatically assign speaker positions> Click Pan Macros, click on the format required, and click OK.The paths will automatically be assigned to the speaker positions insequence starting from the first path (i.e. if 5.1 is selected, the first pathwill be assigned to Front Left, the second to Front Centre, etc.).If there are excess paths, the speaker assignment will cycle round (i.e. if5.1 is selected, the speaker assignments will start again with Front Left forthe 7th path, Centre for the 8th etc).Custom Surround MacrosThe Surround Macro Editor/Viewer is used to define custom surroundmonitoring formats.> To access the Surround Macro Editor/Viewer, click the Pan Macrosbutton and the Pan Designators Macros dialogue box will be displayed.> Ensure the User Defined Macros option is selected.> Click View/Edit Macro.The Custom Macros screen will open.> To create a new macro, click the New Macro button.The name in the Selected box will be cleared and the Surround StemSetup boxes will be reset.> Click and hold on a speaker position icon in the Surround Type Selectarea.The pointer will "pick up" a copy of the speaker icon.> Drag the symbol to the first empty Stem Setup box and release themouse button.The icon will be dropped in the box.> Continue to place the required speaker types in the Stem Setup boxes,working from left to right.The icons will be shown in the sequence they are placed.- 153 -