Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1Label OptionsEncore may already have a list of labels in place when loading a pass thatalso has a label list associated with it.These four options inform Encore how to treat both lists:• Load: Loads labels from the selected pass and discards the currentlist.• Keep: Keeps the current labels and ignores those associated with theselected pass.• Clear: Clears current labels and ignores those associated with theselected pass.• Merge: Adds both labels to form one list.Renumber List On MergeOnly has a function when two label lists are merged together, and ensuresthat both lists are merged, renumbered and time-ordered to form one list.Display Options For Each LoadIf this is ticked, the above Options screen will be displayed each time youload a pass enabling you to change the options.If unticked, the pass will be loaded taking into account the previous stateof these settings.> Click the required check boxes, and click OK, and the mix and Mix/PassTree will be loaded.When this is complete, a confirmation dialogue box will be displayed.> Click OK.Select A Mix From The Filing PageOpens the Filing page, so you can select any mix.Create a New MixOpens the Filing page, so you can create a new mix.Recover Automation on DeskWhen a Mix/Pass is recorded, the automation data is initially stored in thecomputer automation buffer.When timecode stops then this is saved to the current Mix/Pass Treeautomatically if the Keep Mode is set to Auto.If the Keep Mode is set to Manual then it is possible that an un-savedautomation pass is stored in the automation buffer.- 24 -