Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1If working at 96kHz, then only the 1st and 3rd pair of madi ports on each QuadMadi II card will beshown in I/O Patch.Machine Manager (Digital)Machine Manager allows the user to quickly port or unport tapemachines, effects units (plus any associated relays) and the like from areference library of commonly used machines.V5.4 SoftwareThis differs from v5.3 software in that there is a new top-level menu entryin the Ports display screen.This allows you to select the engine you wish to display the madi ports for.Once this has been set, the rest of the software works the same as inprevious versions.First you must create a library of all the machines.> Click the Machines box at the bottom of the screen, then from theMachines menu, choose New.There is a list of the most commonly used machines.> Select the option you require.Selecting the option for Tascam DA88 could be applied to any 8 track digital tape machines, notspecifically those manufactured by Tascam. This applies to all the machines in the preset list.The parameters for that machine will displayed on the right hand side ofthe screen (if the machine does not appear in the preset list, there is alsothe option for the user to create a Custom machine):- 180 -