Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1> Once the timecode is selected, click the Apply button in the Time area.The timecode for the selected Event will be set to the Absolute timecodevalue.To modify an Event Value> Either:Click on the scroll arrows next to the Event Value.The amount by which the value changes depends on the control type.Switches can be set to On or Off.> Click the Default button.The Event Value will be set to the default according to the currently loadedUser Defaults file.> Click the Apply button in the Value area.The value for the selected Event will be adjusted in the list.When all modifications are complete, click the OK button.The Modify dialogue box will close and the Event List will be updated withany changes that were made.When Events have been modified, a new Mix/Pass will be created andadded to the Mix/Pass Tree on exiting the Event List dialogue box.NB: If the Save Mix After Apply box is checked, then a new Mix/Pass willbe created when you click Apply.To Modify a Single Event> Click the event and click Modify.This screen allows you to change the timecode and/or the state of theevent.> Click OK when finished, a new Mix/Pass will be created and you will betaken back to the Mute list.To Create Labels from Events> Click the Label Event button.The Add Label dialogue box will be displayed.The timecode on the label will be taken from the selected Event.The name of the label will show details of the Event (path name ornumber, control type and the control value).If required, edit the label name and/or the timecode.> Click OK, and the label will be added to the Label List.- 105 -