Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1Console Split at Fader NumberAllows the user to set the position at which Left Enable and Right Enablelayer control keys split the console.It also specifies which faders are accessed by the left hand AFU and whichby the right when two AFU panels are fitted.Fader Start OptionsThese options apply to the relays associated with ports in I/O Config (i.e.these options do not affect the GPI).These checkboxes are largely redundant – it is recommended that faderstart operation is set up using GPI configuration within the I/Oconfiguration utility.Momentary SignallingNot implemented yet.Integrity CheckThis check box is synonymous with the Fader Start Integrity Systemcheck box on the GPI Configuration page of I/O Config.When this is checked, then a relay associated with a path by GPIConfiguration will only fire if the path has a clear route to an output.This is in addition to any other conditions that affect the relay (e.g. whenthe Link Logic is set to And).Manual Start/StopAllows the relay to be fired manually using one of the Assignable buttons.Fader Start EnableWhen this option is checked then the Fader Start system is enabled (i.e.moving a fader up will close or toggle the associated relay).(Relays are associated with ports in I/O Manager).GPI OptionsThese options are duplicated in the GPI Configuration page.• Enable AFT: This switches on the Audio Follow Tally System.• Invert AFT: This toggles the input sense of the GPI opto inputs sothat a low-level signal activates the AFT inputs rather than a highlevel signal.• Invert On/Cut: This toggles the input sense of the GPI opto inputsso that a low-level signal activates the ON/CUT switch function ratherthan a high level signal.- 81 -