Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1The console will be muted while Recall scans the controls.All the Channel Solo keys will flash in order as the scan completes, andonce verified, a confirmation box will be displayed.> Click OK to close.Channels and the Monitor section can be selected at any time, includingwhen Recall is actively scanning the console for a Reset.To select a Channel> Either:• Press the Solo key on the required Channel module.• Press the + and - keys on the numeric keypad to step through theChannels.• Click Increment or Decrement on the drop down Channel Select Menuto step through the Channels, or• Click Set Path in the drop down Channel Select Menu (the Set Pathdialogue box will be displayed) and enter the required Channel number.Click OK or press Enter. If the Channel number is out of range (eg. youenter 42 and there are only 36 Channels) it will be ignored.In all cases, the appropriate Channel will be displayed. The Monitor sectionwill be displayed when stepping through the console.To select the Monitor section> Either:• Press the + and - keys on the numeric keypad to step through the consoleto the Monitor section.• Click Increment or Decrement on the drop down Channel Select Menuto step through the Channels, or Click Select Monitor on the drop downChannel Select Menu.In all cases, the Monitor section will be displayed.Resetting to a Recall StoreThe normal procedure for resetting the console to a Recall store is:• Load the required Store.• Use the View Menu to turn off sections that do not require resetting(optional).• Use Auto Recall to Reset the console.> To load the required Recall store, click Open Recall Store on the FileMenu.> If the currently loaded Recall file has changed then a dialogue box willbe displayed to ask if you want to save the changes (click Yes or No asrequired).- 120 -