Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1ConfigurationOffline Encore Two allows you to design console and I/O configurationsaway from the console.This is particularly useful when setup time on the console is limited.Configurations that you create offline can be fine tuned after they havebeen loaded onto the console.Pro Tools ConversionPro Tools Session 5 files can be imported into Encore, even when theconsole is a different size to the original Pro Tools mix, as automation canbe remapped.Offline AutomationOffline Encore Two allows automation data to be viewed and edited awayfrom the console.You can adjust the automation timeline (insert, delete or move scenes orverses) and fine tune individual control moves.Flying Faders ConversionAs Encore Two is available as an upgrade on our series of V desks, theAutomotion utility can be used to convert these mixes to the new formatthat Encore Two uses.It also converts Recall files.Inter-Product TransparencyAutomation recorded on one analogue console can be remapped forplayback (and the addition of further automation) on another analogueconsole of a different frame size thanks to the Reassign feature.Automation is also freely transferable between all analogue products, andacross all digital products.Installing Offline Encore: Minimum Installation Requirements• Windows XP (with SP3), Windows NT 4 with (SP6), Windows 98,Windows 2000 or Windows ME (to check that you have at leastWindows 98, 2000 or ME, right click “My Computer”, and selectProperties).• 100MHz Pentium• 32MB memory• 50MB Hard disk space• 256 colour (8-bit) graphics cardEncore Two runs better with a minimum of 65536 colours (16-bit colour).Encore Two is not available for Mac.- 208 -