Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1If an icon is dropped in an empty box when there are still empty spaces tothe left, then a warning dialogue will appear to indicate that all macroitems must be consecutive.> Click the Click the Save Macro button when the custom macro is complete.The Save Macro dialogue box will appear.> Type a name for the macro and press Enter or click OK.The macro will be saved and the name will be displayed in the Selectedbox.> Click OK, and the Macro will be selected automatically in the PanDesignators Macros dialogue box.To edit an existing surround macro> Click the drop down arrow next to the Selected macro box.A list of available macros will be shown.> Click the required macro name, the name will be shown in the Selectedbox and the speaker icons that form the macro will be shown in theSurround Stem Setup.> Click the Drag and drop the speaker position icons as required, and click theSave Macro button.The Save Macro dialogue box will appear with the name of the macro inthe Macro Name box.> Click OK to save changes to that macro, or change the name and pressEnter or click OK to save the changed macro with a new name.To delete a macro> Click the drop down arrow next to the Selected macro box, and a list ofavailable macros will be shown.Click the required macro name.The name will be shown in the Selected box and the speaker icons thatform the macro will be shown in the Surround Stem Setup.> Click the Delete Macro button (a confirmation dialogue box will bedisplayed).> Click OK.The Macro Name and the Stem Setup will be cleared.Stem Setup with Desk EditThis function is only available when the optional Surround Sound Panelis installed.The Stems page is used to rapidly configure all Film Stems for thesurround monitoring system.- 154 -