Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1Extract Path DataThis is used to select part of the current Play Mix/Pass and create a newMix/Pass.This is useful, for instance, for extracting a scene (or a short sequence ofscenes) to concentrate on that particular part of a Mix.The extracted section can then be merged to combine it with othercompleted work.> Click the Faders, Mutes, etc. check boxes to select which parts of theautomation data to erase.At least one item must be checked in the Include box.> Enter the Isolate From and Isolate To times in the Set Times boxeither manually or by clicking the Select From List button and selectingthe times in the Start and End Times dialogue box.> Click the Whole Mix button to set to isolate from to zero to23:59:59:24.> Click the required paths in the Paths list (click the Select All button tochoose all paths). The selected paths will be highlighted, or click onDeselect All to deselect all paths.> To create the new mix pass, click the Extract button.The Extract Path Data dialogue box will close and a dialogue box willappear confirming that a new Mix/Pass was created.The new Mix/Pass is automatically selected as the Play Pass.- 57 -