Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1The icons can also be dragged left or right on the path to change theprocessing order of existing processing.> To add a processing element click on the required tab of the processpool selector.> Click and hold on the required element in the processing pool then dragthe icon to the required location and release the mouse button.The processing element will be placed on the path.If an item was dragged to the incorrect location, it will jump to the nearestcorrect position.> To move an output Pre or Post fader drag the output icon to therequired location or click the Pre/Post button of the extra function panel(only available when working in Online mode).The current output ports assigned to the path will be shown, as is the Pre/Post status.To show the Insert status click the Inserts tab.Inserts in the path will have their port routing status shown.If a port is shown as Off then this means that the Insert is allocated butthe port routing is off.> To remove a processing element click and hold on the required elementin the path then drag the icon to the process pool and release the mousebutton.The item will be removed from the path.Dependent items may also be removed (e.g. if there is a sidechain, it willbe removed if all the dynamics elements are removed).> To remove all processing in the current path click the Clear button.A dynamics element must be present to add Key Input and/or SidechainEQ.When the Key Input or Sidechain EQ is added it will attach to the firstdynamics element.If the dynamics order is changed then the sidechain will stay attached tothe first dynamics element.If all dynamics are removed then the Key Input and Sidechain EQ will beremoved with the last dynamics element.If a DRC (Dynamic Range Controller) is added then all existing dynamicswill be removed automatically, and vice-versa.Copy & PasteThe Copy and Paste functions allow the configuration of a path to becopied to other paths of the same type (e.g. Channel to Channel).> Select the required path of the same type, click Copy and then Paste.The signal processing shown will change to the be the same as the sourcepath.> To paste the configuration to multiple paths of the same type click thePaste button before another path is selected.A list of paths will be displayed in the Multi-Paste Operation dialogue boxwith a check box next to each path name.- 193 -