Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1> Click the required option, click Load and the Mix Tree will be displayed.> Click the required Mix/Pass number so a black ring is shown around theselected Mix/Pass and click the Load Revision button.The Restoring Modes dialogue box will be displayed.> Click the check boxes as required, and click OK.The Mix will load and progress information will be shown on the screen.Desk SetupsThe Desk Setup contains all the information relating to the configurationof each path, including:• The processing allocated• The order of processing• The settings for each processing element at the time the Desk Setupwas saved• Path names• Routing to and from other paths• Input and/or output routing (patching)• The assignment of paths to the console surface.The Filing page allows three locations for Mix Setups to be saved to:• User: Contains all the setups for the currently logged-on user.• Studio: If you wish the desk boot with a particular default Mix Setup,then they must be in this folder. Setups in this folder are accessible byall users.• Tech: Maintenance and non-engineer Mix Setups.- 33 -