Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1Meter Scale TypeLets you select the scale for all of the meters, either PPM, VU or Peak.This scale will be used across the meterbridge globally.It is not possible to display different types on different panels.Colour OptionsLets you set an alternative background and path colours, so it is clearer todistinguish the metering information.Meter Scale TypeLets you set the type of metering displayed.The options are PPM, VU and Peak.Enable WavTrak Locate Window Start Time> Tick this option to bring a timecode display box on screen.This allows you to set the start time for the WavTrak display on TFTscreens.As there is only a limited number of hours of WavTrak display data thatcan be stored in memory, set this option to be the start of your datadisplay.By default, this is set to 00:00:00:00.If the incoming timecode starts at (for example) 10:00:00:00, then todisplay the relevant WavTrak display, this should also be set to10:00:00:00.Display WavTrak in Bar Graph AreaDisplays WavTrak data as a waveform.Clear WavTrak Data> When changing reels, tick this option to clear the current WavTrak data.Control SensitivityThe Control Sensitivity page is used to select velocity sensitivity fordifferent functions that can be assigned to the Logicators.Velocity SensitivityThis causes a control value to change slightly faster when a Logicator isrotated more rapidly.Layer Key Routing DelayThis is the number of seconds a path Access key must be held downbefore the Path Access key to Path Access key routing function isactivated.- 77 -