Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1> To include or exclude each part of the console, select each oneindividually.A tick in the menu indicates that this section of the console will beincluded in the Reset.Channel Select MenuThe Channel Select Menu is used to select which Channel is displayed byRecall, or to select the Monitor section for display.Next and PreviousUsed to select the next Channel for display when Hold Recall is active orRecall is deactivated.> Either:Press + on the numeric keypad, orPress - on the numeric keypad.In both cases, the next or previous channel will be displayed.• If the last Channel is being displayed, the display will go on to showthe Monitor section.• If the Monitor section is being displayed, the display will go to thefirst Channel.Set PathUsed to jump the display to a particular Channel. Enter the requiredChannel number.Click OK or press Enter, and the Channel will be displayed.If the Channel number is out of range (eg. you enter 42 and there areonly 36 Channels) it will be ignored.Select MonitorUsed to select the Monitor section for display.Select Score PanelThis is only effective if you have the optional Scoring Panel fitted.Please see separate documentation.Activation MenuThe Activation Menu is used to cause Recall to start a Reset operation, orto turn off the current Reset operation.Activate Auto RecallAuto Recall is used to scan the surface to check for differences betweenthe current Recall Store and the console surface.- 125 -