Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1A dialogue box will be displayed for selecting which partition of metersshould be set to follow layer selection.> Tick the required Partitions, click OK, and the selected meters will beset to Strip.> To copy a design, click the Designs button, and a flyout menu withdesign options will appear.> Click the Copy Current Design To Another option.A dialogue box will be displayed for selecting which designs to copy to.> Click the check boxes for the required designs, and click OK.> When the design is complete, click the Save+Load button.A dialogue box will appear to confirm saving the design with the currentfile name.> Click OK, or enter a new file name and then click OK.The meter designs will be loaded into the console and the current designpage will be assigned to the meters. (This is a way of doing a ‘Save As’ fora meter design based on an existing design).When the meter design has been saved, selecting a design page will alsoassign the design on that page to the meters on the bridge.If further changes are made to the design then the changes will not bemade live until another Save+Load is executed.To change individual meter options> To display the required meter number, either• Click on the meter scrolling arrows.• Press the PgUp and PgDn keys on the Encore keyboard to jump eightmeters at a time.• Press the arrow keys on the Encore keyboard to scroll the meters.• Press the Home and End keys on the Encore keyboard to jump to thefirst and last meters, or• Type the required meter number on the Encore keyboard.To change the meter type, click on the drop down arrow next to the metertype box above the required meter.The list of meter types will appear.> Click on the required meter type.If the meter type for a meter in a group (Wild Meters, Stem, PreDub) ischanged then all the meters in that group will change simultaneously.There are no other options for Wild or PreDub meters.- 185 -