Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1Save Mix AsIf you have created a new CPTM with all the Default filenames (as shownabove), this allows you to rename the Client / Project / Title / Mix withyour own names.> Click either the Client / Title / Project or Mix buttons to show thosealready existing, or type in new names and click OK.Automation ModeThis is used to turn the automation system on and off.When automation is off, all the automation functions in Encore areunavailable, plus the timecode display will not run in green.To start the Automation System, click New Mix in the drop down FileMenu, or click the Automate icon.> If you click the Automate icon, a dialogue box will be displayed toselect how to start up the Automation System.> Click the radio button for the required option, and click OK.Reload Last MixThis reloads the most recently loaded Mix/Pass.The Restore Modes dialogue box will be displayed.Restore Safety SnapshotThis is a static snapshot of the state of all automatable controls as theywere at the end of the selected pass.Restore ModesIf ticked, then the state of the automation modes for all controls will bereloaded.If unticked, then all controls will be brought back in Isolate.Restore GangsReloads any gang structures in the selected pass.If unticked, the current state of any gang structures remain unchanged.Restore LinksReloads any Link structures in the selected pass.If unticked, the state of any current link structures remain unchanged.- 23 -