Encore Two User Manual - AMS Neve

Encore Two User Manual Issue 1A file of User Defaults is changed using the Defaults Manager.AES ConfigIf there are any AMS-Neve AES 960 boxes connected via madi, this fileallows you to set parameters from Encore without having to set them fromthe unit itself.These settings can then be saved and recalled, and linked to specific mixsetups using the AES Config programme.Currently Loaded FileAbove the selection box for each file type is a black rectangle. This showsthe currently loaded file.This can be blank for I/O Configurations, Snapshots and User Defaults,indicating that no file of the relevant type is currently loaded.> To select a Desk Setup to work with (if required, click the Show AllDesk Setups check box.This will display a list of all Mix Setups, not just those of the current User).> Click the required file name in the Desk Setup list.The red rectangle will highlight the Desk Setup list and the Filing buttonswill now operate on the selected Desk Setup.If the Desk Setup is not loaded, but the Edit button is used to launchDesk Edit, the file will be loaded when it is saved in the Desk Edit.To select an IO Configuration, Snapshot or User Defaults file> Click the selection box for the required IO Configuration, Snapshot orUser Defaults file.The red rectangle will jump to the selected box.> Click the drop-down arrow next to the box, and a list of available fileswill be shown.> Click the required file.The filing buttons will now operate on the selected Desk Setup.If the file is not Loaded, but the Edit button is used to edit the file, the filewill be loaded when it is saved in the relevant utility.Linking Mixes to Mix Setups and System FilesWhen a Mix Tree is created, the Desk Setup that is loaded is linked to thenew Mix Tree.Each Desk Setup can have an I/O Configuration, a GPI, a Snapshot and aUser Defaults file associated with it.This means that when a Mix Tree is loaded, the linked Desk Setup is alsoLoaded, plus any files that are linked to the Desk Setup.- 36 -